Face Mills
ISCAR
offers a wide range of face mills using a variety of different
types and sizes of inserts. The HELI2000 inserts are available
in 10 and 15mm (.394" and .591") sizes for an easy and
accurate cut and a high surface finish.The square QUAD2000
series of inserts are available in 10, 12 and 16mm (.394",
.472" and .630") sizes. MILL2000 inserts come in 13 and
20mm (.512" and .787") sizes for rough milling at high
feed rates. The HELIOCTO uses both octagonal and round
inserts in the same pocket. And many cutters are available
with 45° and 75° lead angles.
top
Extended
Flute Mills
ISCAR offers a wide range of Extended Flute Mills using
a variety of different types and sizes of inserts. Apart
from the integral-shank tools and shell mills, a modular
system is available. The modular system enables assembling
a tool according to your specific requirements and later
using the same parts for a different tool. You may replace
a damaged segment instead of replacing the whole expensive
tool.
top
Ball
Nose Mills
ISCAR has a wide range of ball nose endmills. Solid carbide
cutters are available for the small diameter range and indexable
tools beginning at 8mm (.315") and extending up to 50mm
(2.0") for standard tools and considerably larger sizes
for special, custom made orders. FLEXFIT, the modular system,
enables assembling a ball nose endmill to any of a variety
of lengths, depending upon the application– an ideal solution
for the mold and die industry. Also available are endmills
with round inserts for large sculptured surfaces and round
corners.
top
Slotting & Slitting Cutters
ISCAR's
slot milling cutters use inserts with four cutting edges.
Suitable for high table feeds, for increased productivity.
Available with an arbor or as a disk type. Top or bottom
or full slot configuration. Diameter range: 80-250mm (3.150-9.843")
Ø on stock sizes, and up to 450mm (17.717")
max. Ø on specials. Width range: 8-25mm (.315-.984").
ISCAR's slitting cutters feature a prismatic-wedged clamping
system which has changed the industry's standard. Each
cutting insert is manually positioned between the flexible
jaws of a Self-Grip pocket - no screws or spare parts
are required. The combination of a stopper that limits
the insertion of the insert and flexible jaws precisely
and securely position each insert. Indexing is both easy
and fast. A simple lever extractor is used to remove the
insert and a plastic hammer aids in indexing. The entire
indexing process is possible with out removing the cutter
from the machine. This eliminates the need to re-position
the cutter, resulting in minimal down-time. Diameter range:
50-350 mm (1.969-13.780") Ø on stock sizes,
and 39-1470mm (1.535-57.874") Ø on specials.
Width range: 1.4-6mm (.550-.236") on stock sizes,
and 1.3-8mm (.051-.315") on specials.
top
Multi-Master System
Multi-Master
is a new family of tools with shanks and unique interchangeable
heads for a variety of milling applications, including
ball nose, straight shoulder, and slitting applications.
Indexing is fast and convenient due to the threaded connection.
Since the tool is not removed from the machine, there
is no set-up time for head replacement. Multi-Master is
a high-tech substitute for HSS and solid carbide milling
cutters. Excellent repeatability is now possible and resharpening
of tools is no longer needed. Multi-Master milling heads
feature advanced pressed geometries with sharp-ground
cutting edges. Endmilling heads are available in ISCAR
grade IC908 (a sub-micron substrate with PVD TiAlN coating)
enabling high speed machining with excellent toughness
and wear resistance. Slitting heads are available in very
tough grades designated IC328 and IC528. They are designed
for precision circular grooves for o-rings and retaining
clips, as well as thread milling applications. This Multi-Master
system is essential for mold and die production with its
long shank options and a high degree of machining efficiency.
ISCAR's Multi-Master can reduce your production costs
through increased production efficiency.
top
