Production Tool & Supply Company
We are your single source for material handling, MRO, carbide inserts and holders, high-speed steel and carbide drills, taps, endmills, coolant, saw blades, grinding wheels and workholding solutions.
Phone: 800-726-6265, Fax: 888-540-6449

   > MRO

Vendors - Cincinnati / Tyrolit

Cincinnati / Tyrolit

 Tyrolit is a leading manufacturer grinding tool, cut-off tool, sawing tools and drilling tools.

Worldwide the Tyrolit Group belongs to the leading suppliers, which offers grinding tools with abrasives in all grit and bond types as well as a comprehensive range of dressing tools. The Tyrolit world brands have not only won an outstanding position in the global marketplace. They are worldwide known brand families and represent the performance potential of over 80,000 different Tyrolit products.

Cimcool® Specialty Products

CENTERSAVER® Waterproof Grease

Lasting lubrication that reduces wear on centers of lathes, grinders and hobbing machines. Centersaver comes in a convenient 2-oz. tube for individual use by each machine operator on both ferrous and nonferrous metals. Centersaver won't run under heat or pressure and metalworking fluids won't wash it away. Available in cartons of 24 2-oz. tubes and 40-lb. pails.

CIMCOOL® Oil Wheel Skimmer

Tramp oil contamination of metalworking fluids can cause a number of plant fluid problems — reduced fluid life and performance, bacteria growth, oil misting, and machine and part residue. The Cimcool oil wheel removes floating tramp oil from metalworking fluids, saving you money and increasing plant productivity.

CIMCOOL® Proportioners

Cimcool Mix Master Proportioner II mixes Cimcool metalworking fluids with water instantly, accurately and economically. No more trial-and-error in mixing — Mix Master Proportioner II assures that a known dilution of water of product is added every time that more fluid is required. Mix Master Proportioner II mounts in either the 2" or 3/4" bung on top of the 55-gallon Cimcool metalworking fluid concentrate drum.

Cimcool Mix Master Automatic Proportioner automatically fills any reservoir to a predetermined, adjustable level and maintains an accurate, adjustable ratio of water to fluid. Like Mix Master Proportioner II, the Automatic Proportioner will save money on labor, equipment, time, and metalworking fluid.

CIMCOOL® Refractometer

The Cimcool refractometer is a light weight, hand held, optical instrument for the measurement of metalworking fluid concentration. The refractometer reading is simply multiplied by the refractometer factor of your specific metalworking fluid to obtain a mix concentration reading.

CIMGUARD® Corrosion Preventives

Cimguard 10 corrosion preventive is a fingerprint neutralizer with water-displacing properties. Its protective coating is thin, transparent, colorless, and slightly oily. For the prevention of corrosion from fingerprints or water. Useful for short-term (6-12 months) indoor storage of dies, jigs, fixtures, machine surfaces and miscellaneous tools. Gives machined or ground parts in-process protection from corrosion. Can be used as a spray, brushed on, or as a dip. Available in cases of 12 9-ounce aerosol cans, 5-gallon pails, 55-gallon drums, and tank trucks.

Cimguard 20 corrosion preventive is a general-purpose product with water displacing properties. Its protective coating is transparent and nonstaining to copper, copper alloys and aluminum. Cimguard 20 can be applied to wet or dry parts. When applied with in-process spray or in a dip tank where fluid runoff is collected for reuse, its water-displacing qualities cause water to settle quickly to the bottom or the reservoir. The water can be periodically drained from the bottom. Available in 5-gallon pails, 55-gallon drums, and tank trucks.

CIMTAP® Tapping Compounds

Cimtap tapping compound is a water-soluble paste that contains conventional and extreme pressure (EP) lubricants. Recommended for a wide range of tapping operations, from hand tapping to high production automatic jobs, on ferrous and nonferrous metals. Cimtap tapping compound can be applied to tap directly, diluted with water and applied with a squirt can, or mixed with CIMCOOL metalworking fluids for high production, multiple operations. Available in cases of 24 1-pint cans, 40-lb. pails, and 250-lb. drums.

Cimtap II tapping compound is designed for blind holes, deep vertical holes and high production operations requiring quick application. Can be used on both ferrous and nonferrous metals. CimTap II contains extreme-pressure additives that form a solid lubricant between chip and tool. Available in cases of 12 reusable 1-pint squirt bottles, 5-gallon pails, 55-gallon drums, and tank trucks.

Bookmark and Share

© 2020 Production Tool & Supply Company — Vendor logos are copyright of their respective companies. All rights reserved.